3com MSR 20-20 참조 매뉴얼
2533
display ipx routing-table verbose
Syntax
display ipx routing-table [ network ] verbose
View
Any view
Parameter
Network: Displays detailed routing information for the network, including both
active and inactive routes.
active and inactive routes.
Description
Use the display ipx routing-table verbose command to display detailed IPX
routing information, including active and inactive routes.
routing information, including active and inactive routes.
If no network is specified, all detailed IPX routing information is displayed.
Example
# Display all detailed IPX routing information, including active and inactive routes.
<Sysname> display ipx routing-table verbose
Routing tables:
Destinations: 2
Routes: 3
Destination Network ID: 0x1
Protocol: Direct
Preference: 0
Ticks: 1
Hops: 0
Nexthop: 0.0000-0000-0000
Time: 0
Interface: 1.0020-9c68-448e(Vlan-interface1)
State: <Active>
Protocol: Static
Preference: -60
Ticks: 1
Hops: 1
Nexthop: 2.000e-0001-0000
Time: 0
Interface: 2.0020-9c68-448f(Vlan-interface2)
State: <Inactive>
Destination Network ID: 0x2
Protocol: Static
Preference: 60
Ticks: 1
Hops: 1
Nexthop: 1.000e-0001-0000
Time: 0
Interface: 1.0020-9c68-448e(Vlan-interface1)
State: <Active>
Table 659 Description on the fields of the display ipx routing-table command
Field Description
Dest_Ntwk_ID
Destination network ID of the route
Proto
Protocol type of the route
Pre
Preference of the route
Ticks
Delay time of the route in ticks (a tick is 1/18 second)
Hops
Hop value of the route
Nexthop
The next hop of the route
Interface
Outgoing interface of the route
Table 660 Description on the fields of the display ipx routing-table verbose command
Field Description
Destinations
Total number of destinations