3com MSR 20-20 참조 매뉴얼

C

HAPTER

 172: IPX C

ONFIGURATION

 C

OMMANDS

display ipx routing-table protocol { default | direct | rip | static } [ inactive | 
verbose ]

Any view

default: Displays default routing information.

direct: Displays direct routing information.

rip: Displays all IPX RIP routing information.

static: Displays all IPX static routing information.

inactive: Displays inactive routing information.

verbose: Displays detailed routing information, including active and inactive 
routes.

Use the display ipx routing-table protocol command to display IPX routing 
information of the specified route types. Classified active and inactive routes are 
displayed if the inactive and verbose keywords are not specified.

# Display default IPX routing information.

<Sysname> display ipx routing-table protocol default

Default routing tables:

Summary count: 0

Default routing tables status:<active>:

Summary count: 0

Default routing tables status:<inactive>:

Summary count: 0

display ipx routing-table statistics 

Routes 

Total number of routes 

Destination Network ID 

Destination network ID of the route 

Protocol 

Protocol type of the route 

Preference 

Preference of the route 

Ticks 

Delay time of the route in ticks (a tick is 1/18 second) 

Hops 

Hop value of the route 

Nexthop 

The next hop of the route 

Time 

Aging time of the route: 0 for directly connected routes and 
static routes, which do not age. 

Interface 

Address and name of the outbound interface 

State 

State of the route, which could be active or inactive

Table 660   Description on the fields of the display ipx routing-table verbose command