3com MSR 20-20 참조 매뉴얼

network.node: Destination address. The argument network is an eight-bit 
hexadecimal number ranging from 0x1 to 0xFFFFFFFD. The argument node is a 
48-bit value represented by a triplet of four-digit hexadecimal numbers separated 
by “-”. The 0s in front can be omitted when inputting.

-c count: Number of ping packets to be sent. By default, the value is 5. This value 
ranges from 1 to 4,294,967,295.

-t timeout: Timeout interval of ping packets in milliseconds. By default, the value is 
2 milliseconds. This value ranges from 0 to 65,535.

-s size: Ping packet size, in bytes. By default, the value is 100 bytes. This value 
ranges from 44 to 1,500.

Use the ping ipx command to check host reachability and network connectivity 
in an IPX network.

# Ping the destination address at 675.0000-a0b0-fefe.

<Sysname> ping ipx 675.0000-a0b0-fefe 

User view

None

Use the reset ipx statistics command to clear IPX statistics.

# Clear IPX statistics.

<Sysname> reset ipx statistics 

reset ipx routing-table statistics protocol [ all | default | direct | rip | static ]

User view

all: Clears the statistics of IPX routes of all types.

default: Clears the statistics of the default IPX route.

direct: Clears the statistics of the direct IPX routes.

rip: Clears the statistics of the IPX RIP routes.

static: Clears the statistics of the static IPX routes.