3com MSR 20-20 참조 매뉴얼

hop hop-count: Number of hops to reach the server, ranging from 1 to 15. Note 
that hop count more than or equal to 16 implies the service is unreachable.

preference preference: Preference of service information, ranging from 1 to 255. 
The smaller the value, the higher the preference. By default, the preference of the 
static service information items is 60 and is configurable, and the preference of the 
dynamic items is 500 and cannot be configured.

all: Deletes all static service information items.

Use the ipx service command to add an IPX static service information item.

Use the undo ipx service command to delete an IPX static service information 
item.

# Add a static service information item with the service type being 4, service name 
“FileServer”, server network ID 130, node value 0000-0a0b-abcd, server hop 1 
and server preference 60.

<Sysname> system-view

[Sysname] ipx service 4 FileServer 130.0000-0a0b-abcd 451 hop 1 preference 60 

Interface view

None

Use the ipx split-horizon command to enable split horizon on the current 
interface.

Use the undo ipx split-horizon command to disable split horizon on the current 
interface.

By default, split horizon is enabled on the interface.

# Enable split horizon on the interface Ethernet1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] ipx split-horizon 

ipx tick ticks