3com MSR 20-20 참조 매뉴얼

C

HAPTER

 173: V

O

IP C

ONFIGURATION

 C

OMMANDS

Use the undo delay wink-rising command to restore the default.

By default, the maximum amount of time the originating side waits for a wink 
signal after sending a seizure signal is 3,000 milliseconds in the wink start mode.

# Set the maximum amount of time the originating side waits for a wink signal 
after sending a seizure signal in the wink start mode to 2,000 milliseconds.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] subscriber-line 1/0

[Sysname-voice-line1/0] em-signal wink

[Sysname-voice-line1/0] delay wink-rising 2000 

delay start-dial seconds

FXS/FXO voice subscriber line view

seconds: Dial delay in seconds, in the range of 0 to 10.

Use the delay start-dial command to configure the dial delay.

Use the undo delay start-dial command to restore the default.

By default, the dial delay is 1 second.

# Set the dial delay on FXS subscriber line 1/0 to 5 seconds.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] subscriber-line 1/0

[Sysname-voice-line1/0] delay start-dial 5 

description text

POTS/VoIP/VoFR entity view

text: Voice entity description string, consisting of up to 80 characters.

Use the description command to configure a voice entity description string.