3com MSR 20-20 참조 매뉴얼

POTS entity view

None

Use the register-number command to enable the VoIP gateway to register 
numbers of a voice entity with an H.323 gatekeeper or SIP server.

Use the undo register-number command to disable a gateway from registering 
numbers of a voice entity with an H.323 gatekeeper or SIP server.

By default, the VoIP gateway registers numbers of the POTS voice entity with an 
H.323 gatekeeper (GK) or SIP server.

In some cases, you need to configure the same POTS entity on multiple gateways. 
As a GK and a SIP server cannot have the same number, you cannot register a 
POTS entity with a GK and a SIP server at the same time.

In other cases, you may need to register only some port numbers on the gateway 
with a GK or a SIP server to meet some special requirements. You can use the 
undo register-number command to specify the voice entity whose number does 
not need to be registered.

# Specify the gateway not to register the numbers of POTS entity 10.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] entity 10 pots

[Sysname-voice-dial-entity10] undo register-number 

User view

None

Use the reset voice cmc statistic command to clear calling statistics on CMC 
module.