3com MSR 20-20 참조 매뉴얼
2620
C
HAPTER
173: V
O
IP C
ONFIGURATION
C
OMMANDS
Related command:
c
CAUTION: You can use this command to reset only the analog voice cards of SIC
and MIM. To reset digital voice card and FIC analog voice card, carry out the
reboot slot slot-number command in system view.
and MIM. To reset digital voice card and FIC analog voice card, carry out the
reboot slot slot-number command in system view.
Example
# Reset the voice card of slot 3.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] vi-card reboot 3
voice-setup
Syntax
voice-setup
View
System view
Parameter
None
Description
Use the voice-setup command to enter voice view and enable voice services.
Example
# Enter voice view and enable voice services.
<Sysname> system-view
[Sysname] voice-setup
voip called-tunnel enable
Syntax
voip called-tunnel enable
undo voip called-tunnel enable
View
Voice view
Parameter
None
Description
Use the voip calledtunnel enable command to enable the tunnel function on
the called gateway.
the called gateway.
Use the undo voip calledtunnel enable command to disable the tunnel
function on the called gateway.
function on the called gateway.
By default, the tunnel function on the called gateway is enabled.
Related command:
n
If the voip called-start normal command is configured, the voip called-tunnel
enable command is unavailable.
enable command is unavailable.