3com MSR 20-20 참조 매뉴얼
2633
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] number-substitute 1
[Sysname-voice-dial-substitute1]
priority
Syntax
priority priority-order
undo priority
View
Voice entity view
Parameter
priority-order: Priority of a voice entity, in the range of 0 to 10. The smaller the
value, the higher the priority.
value, the higher the priority.
Description
Use the priority command to configure the priority of a voice entity.
Use the undo priority command to restore the priority of a voice entity to the
default.
default.
By default, the priority level is 0.
If you have configured priority levels for voice entities and the selection priority
rules (see “select-rule rule-order” on page 2638, “select-rule search-stop” on
page 2639, and “select-rule type-first” on page 2640), the router will first select
the voice entity with the highest priority to initiate a call. When this voice entity
fails, the router will select a voice entity with the second highest priority to initiate
a call.
rules (see “select-rule rule-order” on page 2638, “select-rule search-stop” on
page 2639, and “select-rule type-first” on page 2640), the router will first select
the voice entity with the highest priority to initiate a call. When this voice entity
fails, the router will select a voice entity with the second highest priority to initiate
a call.
Example
# Set the priority level of voice entity 10 to 5.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] priority 5
private-line
Syntax
private-line string
undo private-line
View
FXS/FXO/E&M voice subscriber line view
Parameter
string: E.164 telephone number of the terminating end, a string of 31
digits/characters, which can include 0 through 9, “*” and “#”.
digits/characters, which can include 0 through 9, “*” and “#”.