3com MSR 20-20 참조 매뉴얼

C

HAPTER

 174: D

IAL

 P

LAN

 C

ONFIGURATION

 C

OMMANDS

Voice dial program view

max-number: Maximum number of voice entities found, in the range 1 to 128.

Use the select-rule search-stop command to configure the maximum number 
of voice entities found.

Use the undo select-rule search-stop command to restore the maximum 
number of voice entities found to 128.

By default, the maximum number of voice entities found is 128.

The select-rule search-stop command is used to define the maximum number of 
qualified voice entities to be found before the search stops. Even if the number of 
voice entities meeting call requirements is greater than max-number, the system 
will make call attempts to only the maximum number (max-number) of voice 
entities that are matched in accordance with rules.

select-rule rule-order and select-rule type-first.

# Configure the maximum number of voice entities found to 5.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] select-rule search-stop 5 

select-rule type-first 1st-type 2nd-type 3rd-type

Voice dial program view

1st-type: Serial number of the type of the first priority, in the range of 1 to 3. 
Table 693 describes these values:

2nd-type: Serial number of the type of the second priority, in the range of 1 to 3. 
The value must be different from that of 1st-type.

3rd-type: Serial number of the type of the third priority, in the range of 1 to 3. The 
value must be different from that of 1st-type and 2nd-type.

Table 693 describes the meanings of these values.

Table 693   Meanings of values

1 

POTS voice entity 

2 

VoIP voice entity