3com MSR 20-20 참조 매뉴얼
2694
C
HAPTER
177: H.323 C
ONFIGURATION
C
OMMANDS
[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1
[Sysname-voice-gk] gk-2nd-id gk-backup gk-addr 1.1.1.2
gk-id
Syntax
gk-id gk-name gk-addr gk-ipaddress [ ras-port ]
undo gk-id
View
Gatekeeper client view
Parameter
gk-name: Gatekeeper name, a string of 1 to 128 case sensitive characters.
gk-ipaddress: IP address of gatekeeper.
ras-port: RAS port used by the gatekeeper, an integer in the range 1 to 65535. The
default is 1719.
default is 1719.
Description
Use the gk-id command to configure the primary gatekeeper for the gateway.
Use the undo gk-id command to remove the primary gatekeeper.
By default, no primary gatekeeper is specified for the gateway.
Only after you configure the information of the primary gatekeeper can the
gateway locate the gatekeeper for registration.
gateway locate the gatekeeper for registration.
Related command:
Example
# Configure the primary server, setting its IP address to 1.1.1.1, name to gk-center,
and RAS port to the default.
and RAS port to the default.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1
gk-security call enable
Syntax
gk-security call enable
undo gk-security call enable
View
Gatekeeper client view
Parameter
None
Description
Use the gk-security call enable command to enable security calling on the
voice gateway.
voice gateway.