3com MSR 20-20 참조 매뉴얼
177
H.323 C
ONFIGURATION
C
OMMANDS
area-id
Syntax
area-id string
undo area-id [string ]
View
Gatekeeper client view
Parameter
string: Area ID, a digit string that is 1 to 31 characters in length. The pound signs
(#) can be used as delimiters in the string.
(#) can be used as delimiters in the string.
Description
Use the area-id command to assign an area ID to the H.323 gateway.
Use the undo-area-id command to remove the specified or all area IDs.
By default, no area ID is assigned to the H.323 gateway.
Each area ID identifies a particular type of gateway, for example, 1# for the voice
gateway and 2# for the video gateway, depending on the agreement that the
gateway and the gatekeeper reaches beforehand. When a VoIP entity
communicates with the gatekeeper, the gatekeeper uses the received area ID to
identify the type of the gateway.
gateway and 2# for the video gateway, depending on the agreement that the
gateway and the gatekeeper reaches beforehand. When a VoIP entity
communicates with the gatekeeper, the gatekeeper uses the received area ID to
identify the type of the gateway.
You may assign up to 30 area IDs to the H.323 gateway.
Related command:
Example
# Assign area ID 6# to the gateway.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] area-id 6#
display voice gateway
Syntax
display voice gateway
View
Any view