3com MSR 20-20 참조 매뉴얼

Voice AAA client view

None

Use the authentication-did command to enable the authentication function for 
all one-stage dialing users.

Use the undo authentication-did command to disable the authentication 
function.

By default, the authentication function is disabled for all one-stage dialing users.

This command is applicable to only one-stage dialing users, instead of two-stage 
dialing users.

With this function enabled, the calling number of one-stage dialing users who 
want to make IP calls is sent to the RADIUS server for authentication. Only users 
who pass authentication can make IP calls. Those who fail authentication will be 
disconnected and cannot make IP calls.

The authentication function must be enabled before the authorization function. 
When the authentication function is disabled, the authorization function will 
automatically be disabled, and meanwhile, the authorization-did and undo 
authorization-did commands will be unavailable.

# Enable the authentication function for one-stage dialing users.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] aaa-client

[Sysname-voice-aaa] authentication-did 

Access number view

None

Use the authorization command to enable the authorization function for users 
who dial some access number.

Use the undo authorization command to disable the authorization function.

By default, the authorization function is disabled for users who dial access 
numbers.