3com MSR 20-20 참조 매뉴얼

C

HAPTER

 180: V

OICE

 RADIUS C

ONFIGURATION

 C

OMMANDS

Access number view

None

Use the authentication command to enable the RADIUS authentication function 
for users who dial some access number.

Use the undo authentication command to disable the RADIUS authentication 
function.

By default, the RADIUS authentication function is disabled for users who dial 
access numbers.

For each access number, you can specify the RADIUS server to perform 
authentication for users who dial it. If the authentication function is enabled for 
users who dial some access number, only users who pass authentication can be 
authorized to make IP calls. If the authentication function is disabled, users who 
dial the access number can directly make IP calls no matter whether they are legal.

The authentication function must be enabled before the authorization function. 
When the authentication function is disabled, the authorization function will 
automatically be disabled, and meanwhile, the authorization and undo 
authorization commands will be unavailable.

gw-access-number and authorization.

# Enable the authentication function for users who dial the access number 17909.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] gw-access-number 17909

[Sysname-voice-dial-anum17909] authentication 

# Disable the authentication function for users who dial the access number 17909.

[Sysname-voice-dial-anum17909] undo authentication