3com MSR 20-20 참조 매뉴얼
2736
C
HAPTER
180: V
OICE
RADIUS C
ONFIGURATION
C
OMMANDS
gw-access-number
Syntax
gw-access-number access-number
undo gw-access-number { access-number | all }
View
Voice dial program view
Parameter
access-number: Access number (for example, 169 and 17909), a string of up to 31
characters consisting of digits 0 through 9 and the wildcard “.”. The wildcard “.”
represents a digital character and must follow a digit or appear separately.
characters consisting of digits 0 through 9 and the wildcard “.”. The wildcard “.”
represents a digital character and must follow a digit or appear separately.
all: Deletes all access numbers.
Description
Use the gw-access-number command to configure an access number or enter
access number view.
access number view.
Use the undo gw-access-number command to delete one or all access
numbers.
numbers.
By default, no access number is configured.
When you delete all configured access numbers, the voice gateway will give alarm
information, requiring you to make a confirmation. You can press <Y> to delete all
access numbers or press <N> to cancel the operation.
information, requiring you to make a confirmation. You can press <Y> to delete all
access numbers or press <N> to cancel the operation.
AcctRsp_PstnCaller
Accounting_Response message for PSTN caller
AcctRsp_VoipCaller
Accounting_Response message for VoIP caller
AcctRsp_PstnCalled
Accounting_Response message for PSTN callee
AcctRsp_VoipCalled
Accounting_Response message for VoIP callee
Account_Ok Accounting_Ok
message
Account_Failure Accounting_Failure
message
Cut Cut
message
CMC=>VORDS
Messages from the CMC module to the voice RADIUS module
Setup Setup
message
Alerting Alerting
message
Connect Connect
message
Release Release
message
DtmfInformation DTMF
digit
ChannelReady Channel_Ready
message
FaxVoiceSwitch Fax_Voice_Switch message
FaxTone Fax_Tone
message
Table 703 Description on fields of the display voice radius statistic command
Field Description