3com MSR 20-20 참조 매뉴얼

C

HAPTER

 21: B

ASIC

 DLS

W

 C

ONFIGURATION

 C

OMMANDS

[Sysname] dlsw reachable saps 12 14 

# Permit access to user-configured MAC addresses only.

[Sysname] dlsw reachable mac-exclusivity 

dlsw reachable-cache mac-address remote ip-address

undo dlsw reachable-cache mac-address remote ip-address

System view

mac-address: MAC address of the SNA device connected to a remote peer.

ip-address: IP address of a remote peer.

Use the dlsw reachable-cache command to add the reachability information of 
the specified SNA device to the reachable-cache.

Use the undo dlsw reachable-cache command to remove the configured 
remote reachability information from the reachable-cache.

By default, no remote reachability information is configured.

This configuration allows the router to send frames to a remote peer without first 
polling it. When changes occur to the network of the remote peer, the configured 
reachability information needs to be updated.

# Add this remote reachability information to the reachable-cache: the IP address 
of the remote peer is 10.12.13.10, and the MAC address of the SNA device 
connected with it is 0102-2103-5641..

<Sysname> system-view

[Sysname] dlsw reachable-cache 0102-2103-5641 remote 10.12.13.10 

dlsw remote ip-address [ backup backup-address | keepalive keepalive-interval | 
linger minutes | max-frame max-frame-size | max-queue max-queue-length | priority 
priority ] *

undo dlsw remote ip-address

System view

ip-address: IP address of the remote peer to be created.