3com MSR 20-20 참조 매뉴얼

C

HAPTER

 22: F

RAME

 R

ELAY

 C

ONFIGURATION

 C

OMMANDS

Use the display fr compress command to display the statistics information 
about frame relay compression. If no interface is specified, the DLCI statistics 
information for all interfaces is displayed.

# Display the frame relay compression statistics information of FRF.9 stac.

<Sysname> display fr compress

Serial2/0

-DLCI:22

enable frame-relay compression

uncompressed bytes send/receive : 0/0

compressed bytes send/receive : 0/0

1 min

avg ratio send/receive :

0.000/0.000

5 min

avg ratio send/receive :

0.000/0.000 

display fr dlci-switch [ interface interface-type interface-number ]

Any view

interface interface-type interface-number: Specifies an interface by its type and 
number.

Use the display fr dlci-switch command to display the information about the 
configured FR switching to check if the frame relay switching of a user is correctly 
configured.

The interface specified by interface-type interface-number can only be a main 
interface. If no interface is specified, this command displays the information about 
all the main interfaces.

# Display the information of the configured FR switching.

<Sysname> display fr dlci-switch

Frame relay switch statistics

Status

Interface(Dlci)

<---------->

Interface(Dlci)

Inactive Serial2/1(100)

Serial2/0(300) 

Table 39   Description on the fields of the display fr compress command

enable frame-relay compression 

Frame relay compression is enabled 

uncompressed bytes send/receive 

Size of the uncompressed data transmitted 
/received (in bytes) 

compressed bytes send/receive 

Size of the compressed data transmitted/received 
(in bytes) 

1 min avg ratio send/receive 

Average transmission/receiving rate during the 
latest one minute 

5 min avg ratio send/receive 

Average transmission/receiving rate during the 
latest five minutes