3com MSR 20-20 참조 매뉴얼

display fr inarp-info [ interface interface-type interface-number ]

Any view

interface interface-type interface-number: Specifies an interface by its type and 
number. It can only be a main interface.

Use the display fr inarp-info command to display statistics about frame relay 
inverse ARP (INARP) packets, including requests and replies, for the specified or all 
interfaces.

You may use this command to diagnose whether INARP is operating normally.

fr inarp.

# Display statistics about frame relay INARP packets.

<Sysname> display fr inarp-info

Frame relay InverseARP

statistics for interface Serial2/0 (DTE)

In ARP request

Out ARP reply

Out ARP request

In ARP reply

0

0

1

1 

display fr interface [ interface-type { interface-number | 
interface-number.subnumber } ]

Any view

Table 40   Description on the fields of the display fr dlci-switch command

Frame relay switch statistics 

The statistics of frame relay switch 

Status 

The status of frame relay switching function 

Interface(Dlci) <----------> 
Interface(Dlci) 

Input interface and its DLCI, output interface and its DLCI.

Table 41   Description on the fields of the display fr inarp-info command

Frame relay InverseARP statistics for interface 
Serial2/0 (DTE) 

Display frame relay INARP packet statistics 
of the interface 

In ARP request 

Received ARP requests 

Out ARP reply 

Transmitted ARP replies 

Out ARP request 

Transmitted ARP requests 

In ARP reply 

Received ARP replies