3com MSR 20-20 참조 매뉴얼

[Sysname-Serial2/0] fr interface-type dte

[Sysname-Serial2/0] timer hold 15 

x25-template name

undo x25-template name

DLCI interface view

Name: Name of an X.25 template, a string of 1 to 30 characters.

Use the x25-template command to apply an X.25 template to a VC.

Use the undo x25-template command to remove the X.25 template applied to 
a VC.

Annex G implements X.25 over FR. You can configure X.25 parameters for an 
X.25 over FR DLCI using the x25 template command and apply the template in 
DLCI interface view.

# Apply the X.25 template named “vofr” to DLCI 100.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] fr dlci 100

[Sysname-fr-dlci-Serial2/0-100] x25-template vofr 

x25 template name

undo x25 template name

System view

Name: Name of an X.25 template, a string of 1 to 30 characters.

Use the x25 template command to create an X.25 template or enter X.25 
template view.

Use the undo x25 template command to remove an X.25 template.

As for the x25 template command, if the X.25 template identified by the name 
argument already exists, this command leads you to X.25 template view. 
X.25-/LAPB-related parameters are configured in X.25 template view.

# Create an X.25 template named “vofr”.