3com MSR 20-20 참조 매뉴얼

C

HAPTER

 26: LAPB 

AND

 X.25 C

ONFIGURATION

 C

OMMANDS

hunt-group-name: Hunt group name, a string of 1 to 30 characters.

Use the display x25 hunt-group-info command to view the status information 
of X.25 hunt group.

You can use this command to learn the hunt group of the Router and the 
information about the interfaces and XOT channel inside the hunt group.

x25 hunt-group.

# Display the status information of X.25 hunt group hg1.

<Sysname> display x25 hunt-group-info hg1

HG_ID : hg1

HG_Type: round-robin

member

state

vc-used

in-pkts

out-pkts

Serial1/0

Last used

2

51

20

Serial2/0

Next

1

21

15

1.1.1.1

Normal

1

24

3 

Any view

None

Use the display x25 map command to display the X.25 address mapping table.

The X.25 address mapping can be configured in two methods: using the x25 map 
command or using the x25 pvc command. The display x25 map command can 
display all the address mappings.

Table 57   Description on the fields of the display x25 hunt-group-info command

HG_ID : hg1 

The hunt group name is hg1 

HG_Type: round-robin 

Hunt group call channel selection policy (including round-robin 
and vc-number) 

member 

Interfaces or XOT channel contained in hunt group 

state 

The state of the current interface or XOT channel, including:

Last used: latest used

Next: next selected

Normal: normal state

Unavail: Unavailable state 

vc-used 

Number of calls on the interface or XOT channel (including call 
success and call failure) 

in-pkts 

Input flow on the interface or XOT channel in packets 

out-pkts 

Output flow on the interface or XOT channel in packets