3com MSR 20-20 참조 매뉴얼
427
Example
# Display the X.25 address mapping table.
<Sysname> display x25 map
Interface:Serial3/0(protocol status is up):
ip address:202.38.162.2
X.121 address: 22
map-type: SVC_MAP
VC-number: 0
Facility:
ACCEPT_REVERSE;
BROADCAST;
PACKET_SIZE: I 512
O 512
display x25 pad
Syntax
display x25 pad [ pad-id ]
View
Any view
Parameter
pad-id: X.25 PAD connection (packet assembly/disassembly facility). The ID is in
the range 0 to 255.
the range 0 to 255.
Description
Use the display x25 pad command to display X.25 PAD connection information.
If no pad ID is specified, all PAD connection information will be displayed.
Example
# Display all X.25 PAD connection information.
<Sysname> display x25 pad
UI-INDEX130:
From remote 22 connected to local 11, State: Normal
X.3Parameters(In):
1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14
12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0
X.3Parameters(Out):
1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14
12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0
Input:
Pkts(total/control): 13/2
bytes:12
queue(size/max) :0/200
Output:
Pkts(total/control): 15/2
bytes:320
Table 58 Description on the fields of the display x25 map command
Field Description
Interface:Serial3/0(protocol status is up)
Interface name and protocol status
ip address:202.38.162.2 X.121 address: 22
IP address and X.121 address of the
interface
interface
map-type: SVC_MAP
Mapping type
VC-number: 0
VC number
Facility:
User facility of the interface