3com MSR 20-20 참조 매뉴얼
455
x25 response called-address
Syntax
x25 response called-address
undo x25 response called-address
View
Interface view
Parameter
None
Description
Use the x25 response called-address command to enable X.25 call reception
packets to carry the address information of the called DTE.
packets to carry the address information of the called DTE.
Use the undo x25 response called-address command to disable the above
function.
function.
By default, this function is disabled.
According to X.25, the call reception packet may or may not carry an address code
group, depending on the specific network requirements. This command enables
users to easily specify whether the packet carries the called DTE address.
group, depending on the specific network requirements. This command enables
users to easily specify whether the packet carries the called DTE address.
Related command:
Example
# Specify that the call receiving packet of a call sent from the X.25 interface Serial
2/0 carries the called DTE address.
2/0 carries the called DTE address.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] x25 response called-address
x25 response calling-address
Syntax
x25 response calling-address
undo x25 response calling-address
View
Interface view
Parameter
None
Description
Use the x25 response calling-address command to enable X.25 to carry the
address information of the calling DTE in call reception packets
address information of the calling DTE in call reception packets
Use the undo x25 response calling-address command to restore the default.
By default, this function is disabled.