3com MSR 20-20 참조 매뉴얼
462
C
HAPTER
26: LAPB
AND
X.25 C
ONFIGURATION
C
OMMANDS
interfaces or XOT channels in the specified hunt group, to implement the load
sharing of X.25 protocol.
sharing of X.25 protocol.
■
X.25 hunt group supports source address and destination address replacement.
With destination address replacement, you can hide X.121 address of DTE
inside the hunt group so that the outside DTE knows only the X.121 address of
the hunt group, therefore enhancing network security inside the hunt group.
With source address replacement, you can hide X.121 address of DTE outside
the hunt group so that the inside DTE knows only the source X.121 address
after replacement but not the source X.121 address the call connects, therefore
protecting you privacy.
With destination address replacement, you can hide X.121 address of DTE
inside the hunt group so that the outside DTE knows only the X.121 address of
the hunt group, therefore enhancing network security inside the hunt group.
With source address replacement, you can hide X.121 address of DTE outside
the hunt group so that the inside DTE knows only the source X.121 address
after replacement but not the source X.121 address the call connects, therefore
protecting you privacy.
Related command:
Example
# Add an X.25 switching SVC, whose destination X.121 address is 111 and
forwarding address is the hunt group hg1, and substitute the destination address
with 9999 and the source address with 8888.
forwarding address is the hunt group hg1, and substitute the destination address
with 9999 and the source address with 8888.
<Sysname> system-view
[Sysname] x25 switch svc 111 sub-dest 9999 sub-source 8888 hunt-group hg1
x25 switch svc xot
Syntax
x25 switch svc x.121-address [ sub-dest destination-address | sub-source
source-address ] * xot ip-address&<1-6> [ xot-option ]
source-address ] * xot ip-address&<1-6> [ xot-option ]
undo x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] [ xot ip-address&<1-6> ]
source-address ] [ xot ip-address&<1-6> ]
View
System view
Parameter
x.121-address: Destination address of X.121, a mode matching string with a 1 to
15 numeric characters. For the specific description of mode matching, see
Table 69 and Table 70. If no wildcard is used, the X.121 address must exactly
match.
15 numeric characters. For the specific description of mode matching, see
Table 69 and Table 70. If no wildcard is used, the X.121 address must exactly
match.
sub-dest destination-address: X.121 address, a string of 1 to 15 characters. The
system replaces the destination DTE address in the call request packet with the
destination-address.
system replaces the destination DTE address in the call request packet with the
destination-address.
sub-source source-address: X.121 address, a string of 1 to 15 characters. The
system replaces the source DTE address in the call request packet with the
source-address.
system replaces the source DTE address in the call request packet with the
source-address.
xot ip-address&<1-6>: Destination IP address of XOT connection, up to 6
addresses can be configured.
addresses can be configured.
xot-option: XOT channel parameter option. For the specific configuration, see
Table 71.
Table 71.