3com MSR 20-20 참조 매뉴얼
480
C
HAPTER
27: L
INK
A
GGREGATION
C
ONFIGURATION
C
OMMANDS
Use the undo link-aggregation group description command to remove the
name of the specified link aggregation group.
name of the specified link aggregation group.
Related command:
Example
# Name link aggregation group 22 as abc.
<Sysname> system-view
[Sysname] link-aggregation group 22 description abc
link-aggregation group mode
Syntax
link-aggregation group agg-id mode { manual | static }
undo link-aggregation group agg-id
View
System view
Parameter
agg-id: Link aggregation group ID, in the range 1 to 144.
manual: Creates a manual link aggregation group.
static: Creates a static LACP link aggregation group.
Description
Use the link-aggregation group mode command to create a link aggregation
group.
group.
Use the undo link-aggregation group command to remove a link aggregation
group.
group.
Note that aggregation groups currently referenced by modules cannot be
removed.
removed.
Related command:
Example
# Create manual link aggregation group 22.
<Sysname> system-view
[Sysname] link-aggregation group 22 mode manual
port link-aggregation group
Syntax
port link-aggregation group agg-id
undo port link-aggregation group
View
Ethernet interface view
Parameter
agg-id: Link aggregation group ID, in the range 1 to 144.