3com MSR 20-20 참조 매뉴얼

C

HAPTER

 31: PPP 

AND

 MP C

ONFIGURATION

 C

OMMANDS

display interface virtual-template [ number ]

Any view

number: Virtual template (VT) number, which can be the number of any existing 
VT.

Use the display interface virtual-template command to view the information 
about a VT. If you do not provide the number argument, this command will display 
the information about all the existing VTs.

interface virtual-template.

# View the information about VT 1.

<Sysname> display interface virtual-template 1

Virtual-Template1 current state: UP

Line protocol current state: UP (spoofing)

Description: Virtual-Template1 Interface

The Maximum Transmit Unit is 1500

Internet protocol processing : disabled

Link layer protocol is PPP

LCP initial

Physical is None

Output queue : (Urgent queue : Size/Length/Discards)

0/50/0

Output queue : (Protocol queue : Size/Length/Discards) 0/500/0

Output queue : (FIFO queuing : Size/Length/Discards)

0/75/0

Last 300 seconds input:

0 bytes/sec 0 packets/sec

Last 300 seconds output:

0 bytes/sec 0 packets/sec

0 packets input, 0 bytes, 0 drops

0 packets output, 0 bytes, 0 drops 

Refer to Table 82 for the description on the other fields.

LCP initial 

Link control protocol (LCP) negotiation is complete 

Physical Physical 

type of the interface 

Last 300 seconds input: 0 bytes/sec 
0 packets/sec

Last 300 seconds output: 0 bytes/sec 
0 packets/sec 

Average rate of input packets and output packets in the 
last 300 seconds (in bps) 

0 packets input, 0 bytes, 0 drops 

Total amount of input packets of the interface (in the 
number of packets and in bytes respectively), and the 
number of dropped packets within the input packets 

0 packets output, 0 bytes, 0 drops 

Total amount of output packets of the interface (in the 
number of packets and in bytes respectively), and the 
number of dropped packets within these output 
packets

Table 82   Description on the fields of the display interface mp-group command