3com MSR 20-20 참조 매뉴얼

C

HAPTER

 31: PPP 

AND

 MP C

ONFIGURATION

 C

OMMANDS

ppp mp mp-group number

Interface view

number: MP-group interface number, in the range 0 to 1023.

Use the ppp mp mp-group command to add the current interface to the 
specified MP-group.

Use the undo ppp mp mp-group command to remove the current interface 
from the specified MP-group.

This command should be used along with the interface mp-group command. 
With the two commands, you can create an MP-group interface first and then add 
an interface to the MP-group. It does not matter if you reverse the two steps.

Note that only physical interfaces can be added to an MP group. Logical interfaces 
such as Tunnel interfaces do not support this command.

# Add interface Serial 3/0 to MP-group 3.

<Sysname> system-view

[Sysname] interface serial 3/0

[Sysname-Serial3/0] ppp mp mp-group 3 

ppp mp user username bind virtual-template number

undo ppp mp user username

System view

username: User name, a string of 1 to 80 characters.

virtual-template number: Specifies a virtual-template. The number argument is 
in the range of 0 to 1023.

Use the ppp mp user command to bind an MP user to a virtual template.

Use the undo ppp mp user command to remove the specified binding.

In establishing a PPP connection, after PPP authentication succeeds, if a 
virtual-template is specified, MP will be bound based on the parameters of the 
virtual-template and a new virtual interface will be formed to transfer data.