3com MSR 20-20 참조 매뉴얼
36
B
RIDGING
C
ONFIGURATION
C
OMMANDS
bridge aging-time
Syntax
bridge aging-time seconds
undo bridge aging-time
View
System view
Parameters
seconds: Aging time of dynamic bridge table entries, in seconds, with an effective
range of 10 to 1000000.
range of 10 to 1000000.
Description
Use the bridge aging-time command to configure the aging time of dynamic
bridge table entries.
bridge table entries.
Use the undo bridge aging-time command to restore the default setting.
By default, the aging time of dynamic bridge table entries is 300 seconds.
Example
# Set the aging time of dynamic bridge table entries to 500 seconds.
<Sysname> system-view
[Sysname] bridge aging-time 500
bridge bridge-set enable
Syntax
bridge bridge-set enable
undo bridge bridge-set enable
View
System view
Parameters
bridge-set: Bridge set number, an integer in the range of 1 to 255.
Description
Use the bridge bridge-set enable command to enable a bridge set.
Use the undo bridge bridge-set enable command to remove a bridge set.
n
■
Before you can enable the bridge set feature, you need to enable bridging first.
■
Other related configurations can take effect only if the bridging and bridge set
features are enabled. This command is required for bridge configuration.
features are enabled. This command is required for bridge configuration.