3com MSR 20-20 참조 매뉴얼
555
display bridge information
Syntax
display bridge information [ bridge-set bridge-set ]
View
Any view
Parameters
bridge-set: Bridge set number, an integer in the range of 1 to 255.
Description
Use the display bridge information command to view the information about
the specified bridge set or all bridge sets.
the specified bridge set or all bridge sets.
Example
# View the information about all bridge sets.
<Sysname> display bridge information
Bridge module is activated,2 port take part in bridge module at all;
Address table has 15 item, with
1 static one; life cycle is 300 (s).
Bridge set 1 :
configure :bridge 1 enable;
bridging ip, undo bridging ipx; bridging others;
undo routing ip, undo routing ipx;
bridge 1 learning
interface :total 2 interface(s) in the set
Ethernet1/0 : up
Ethernet1/1 : up
Bridge set 2 :
configure :bridge 2 enable;
bridging ip, undo bridging ipx; bridging others;
undo routing ip, undo routing ipx;
bridge 2 learning
interface :total 2 interface(s) in the set
Ethernet1/0.1 :up
Ethernet1/0.2 :up
Set
Bridge set number
Flag
Flag can be any of the four values: P--PERMIT N--DENY
D--DYNAMIC S--STATIC
D--DYNAMIC S--STATIC
P: The permit rule is used for MAC address filtering
N: The deny rule is used for MAC address filtering
D: This entry is a dynamic entry
S: This entry is a static entry
Aging-time
The aging time of bridge table entries
Receive
Number of received frames destined for this MAC address
Send
Number of forwarded frames destined for this MAC address
Interface-name
Outbound interface name
Table 90 Description on the fields of the display bridge address-table command
Field Description