3com MSR 20-20 참조 매뉴얼

C

HAPTER

 36: B

RIDGING

 C

ONFIGURATION

 C

OMMANDS

■

As shown above, after being added into bridge set 1, Ethernet1/0 automatically 
works in the promiscuous operation mode. When working in the promiscuous 
operation mode, an Ethernet interface forwards all correct frames, without 
filtering any MAC address.

display bridge address-table [ bridge-set bridge-set | dlsw | interface interface-type 
interface-number | mac mac-address ] [ dynamic | static ]

Any view

bridge-set: Bridge set number, an integer in the range of 1 to 255.

dlsw: Displays the bridge table information about DLSw.

interface-type interface-number : Specifies an interface by its name and number.

mac-address: MAC address, in the format of H-H-H

dynamic: Displays the information about dynamically learned addresses in the 
bridge table.

static: Displays the information about manually configured about addresses in the 
bridge table.

Use the display bridge address-table command to view the bridge table 
information.

# View the information about all the manually configured entries in the bridge 
table.

<Sysname> display bridge address-table static

The total of the address-items is 1

Mac-address

Set Flag Aging-time

Receive

Send Interface-name

0000-0001-0001

2

NS

00:02:04

0

0

Ethernet1/0

Flag meaning:

P--PERMIT

N--DENY

D--DYNAMIC

S--STATIC 

# View the information about a dynamically learned MAC address 
1234-5678-1234 in the bridge table.

<Sysname> display bridge address-table mac 1234-5678-1234 dynamic

Mac-address

Set Flag Aging-time

Receive

Send Interface-name

1234-5678-1234

1

PD

00:02:48

36

0

Ethernet1/0

Flag meaning:

P--PERMIT

N--DENY

D--DYNAMIC

S--STATIC 

Table 90   Description on the fields of the display bridge address-table command

Mac-address MAC 

address