3com MSR 20-20 참조 매뉴얼
605
instance
Syntax
instance instance-id vlan vlan-list
undo instance instance-id [ vlan vlan-list ]
View
MST region view
Parameters
instance-id: MST instance ID, in the range of 0 to 15.
vlan-list: VLAN list. You can specify multiple VLANs or VLAN ranges by providing
this argument in the form of vlan-list = { vlan-id [ to vlan-id ] }&<1-10>, where,
vlan-id is in the range of 1 to 4094, and &<1-10> means that you can specify up
to 10 VLANs or VLAN ranges for this argument.
this argument in the form of vlan-list = { vlan-id [ to vlan-id ] }&<1-10>, where,
vlan-id is in the range of 1 to 4094, and &<1-10> means that you can specify up
to 10 VLANs or VLAN ranges for this argument.
Description
Use the instance command to map the specified VLAN(s) to the specified MST
instance.
instance.
Use the undo instance command to remove the specified VLAN(s) from the
specified MST instance and map the removed VLAN(s) to the CIST (MST instance
0).
specified MST instance and map the removed VLAN(s) to the CIST (MST instance
0).
By default, all VLANs are mapped to the CIST.
Notice that:
■
If you specify no VLAN in the undo instance command, all VLANs mapped to
the specified MST instance will be remapped to the CIST.
the specified MST instance will be remapped to the CIST.
■
You cannot map the same VLAN to different MST instances. If you map a VLAN
that has been mapped to an instance to a new instance, the old mapping will
be automatically removed.
that has been mapped to an instance to a new instance, the old mapping will
be automatically removed.
Related commands:
region-name, revision-level, check region-configuration, vlan-mapping
modulo, and active region-configuration.
modulo, and active region-configuration.
Examples
# Map VLAN 2 to MST instance 1.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] instance 1 vlan 2
region-name
Syntax
region-name name
undo region-name
View
MST region view