3com MSR 20-20 참조 매뉴얼
44
L
OGICAL
I
NTERFACE
C
ONFIGURATION
C
OMMANDS
n
This section introduces basic configurations about logical interfaces. For the
configurations about the data link layer, the network layer and some special
features, refer to the relevant sections in Chapter 1 through Chapter 37 and
Chapter 46 through Chapter 70.
configurations about the data link layer, the network layer and some special
features, refer to the relevant sections in Chapter 1 through Chapter 37 and
Chapter 46 through Chapter 70.
broadcast-limit link
Syntax
broadcast-limit link number
undo broadcast-limit link
View
Virtual template (VT) view
Parameter
number: Maximum number of links that can send multicast or broadcast packets
in a VT. This argument ranges from 0 to 128 and defaults to 30. The value 0
indicates that multicast packets or broadcast packets cannot be sent.
in a VT. This argument ranges from 0 to 128 and defaults to 30. The value 0
indicates that multicast packets or broadcast packets cannot be sent.
Description
Use the broadcast-limit link command to set the maximum number of links
that can send multicast or broadcast packets in a VT. Use the undo
broadcast-limit link command to restore the default setting.
that can send multicast or broadcast packets in a VT. Use the undo
broadcast-limit link command to restore the default setting.
When a VT has plenty of links, the system performance will be decreased if all the
links send multicast or broadcast packets. In this case, you can use the
broadcast-limit link command to limit the maximum number of links that can
send multicast packets or broadcast packets.
links send multicast or broadcast packets. In this case, you can use the
broadcast-limit link command to limit the maximum number of links that can
send multicast packets or broadcast packets.
Example
# Set the maximum number of links that can send multicast or broadcast packets
in VT 1 to 100.
in VT 1 to 100.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] broadcast-limit link 100
display interface loopback
Syntax
display interface loopback [ number ]
View
Any view