3com MSR 20-20 참조 매뉴얼
59
IP A
DDRESSING
C
ONFIGURATION
C
OMMANDS
display ip interface
Syntax
display ip interface [ interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display ip interface command to display information about a specified
or all Layer 3 interfaces.
or all Layer 3 interfaces.
Example
# Display detailed information about IP for interface Ethernet 1/0.
<Sysname> display ip interface ethernet 1/0
Ethernet1/0 current state : DOWN
Line protocol current state : DOWN
Internet Address is 1.1.1.1/8 Primary
Broadcast address : 1.255.255.255
The Maximum Transmit Unit : 1500 bytes
ip fast-forwarding incoming packets state is Disable
ip fast-forwarding outgoing packets state is Disable
input packets : 0, bytes : 0, multicasts : 0
output packets : 0, bytes : 0, multicasts : 0
ARP packet input number:
0
Request packet:
0
Reply packet:
0
Unknown packet:
0
TTL invalid packet number:
0
ICMP packet input number:
0
Echo reply:
0
Unreachable:
0
Source quench:
0
Routing redirect:
0
Echo request:
0
Router advert:
0
Router solicit:
0
Time exceed:
0
IP header bad:
0
Timestamp request:
0
Timestamp reply:
0
Information request:
0
Information reply:
0
Netmask request:
0
Netmask reply:
0