3com MSR 20-20 참조 매뉴얼

display ip interface brief [ interface-type [ interface-number ] ]

Any view

interface-type: Interface type.

interface-number: Interface number.

Use the display ip interface brief command to display brief information about 
a specified or all Layer 3 interfaces.

Without the interface type and interface number specified, information about all 
layer 3 interfaces is displayed; with only the interface type specified, the 
information about all layer 3 interfaces of the specified type is displayed; with both 
the interface type and interface number specified, only the information about the 
specified interface is displayed.

Note that:

If you have configured the time slots of a CE1/PRI or CT1/PRI interface as an ISDN 
PRI group using the pri-set command, then executing the display ip interface 
brief command only displays the time slot used by the control channel (D 
channel), instead of the ones used by the user channels (B channels). For details 
about CE1/PRI and CT1/PRI interfaces, refer to “Fundamental CE1/PRI Interface 
Configuration Commands” on page 201 and “Fundamental CT1/PRI Interface 
Configuration Commands” on page 213.

display ip interface.

n

E1/T1 interfaces are time slotted. Using the pri-set command can bind time slots of 
an E1/T1 interface into an ISDN PRI group, with each time slot corresponding to a 
serial interface. To make the displayed output simple and clear, only the time slot 
of the control channel (D channel) is displayed regardless of whether the display 
ip interface brief command has an interface included or not.

# Display brief information about Ethernet 1/0.

DHCP packet deal mode 

DHCP packet processing mode. This field 
appears on a DHCP-supporting device and 
can be one of the following values:

■

global: The DHCP server with the global 
address pool is enabled on the 
interface.

■

relay: The DHCP relay agent is enabled 
on the interface.

Table 154   Description on fields of the display ip interface command