3com MSR 20-20 참조 매뉴얼

C

HAPTER

 70: T

ERMINAL

 A

CCESS

 C

ONFIGURATION

 C

OMMANDS

terminal-number: Terminal number corresponding to the RTC client, ranging 1 to 
255.

Use the vty rtc-server remote command to create a VTY to serve as the RTC 
server.

Use the undo vty command to remove the specified VTY.

Note that, after this configuration, no more Telnet VTYs, TTY VTYs, or RTC client 
VTYs can be configured in the template of the VTY.

# Create a VTY to serve as the RTC server, setting the IP address of the RTC client 
to 2.2.2.2 and the terminal number to 1.

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc] vty 1 rtc-server remote 2.2.2.2 1 

vty vty-number screencode string

undo vty vty-number screencode

Terminal template view

vty-number: VTY number, ranging 0 to 7.

string: Terminal screen code, a string of 1 to 15 characters.

Use the vty screencode command to set the screen code for triggering screen 
saving.

Use the undo vty screencode command to cancel the screen code configured.

By default, no screen code is configured for terminal screen saving.

Some types of terminals provide the screen saving function. When such a terminal 
receives the specified screen code, such as E!10Q (for details about screen codes, 
refer to the related terminal manuals), it saves the current interface and switch to 
the corresponding screen.

Note that this function requires terminal support and the screen code configured 
on the router and that specified on the terminal must be the same. Screen codes 
configured vary with terminal types. For details, refer to the corresponding 
terminal manuals. For example, Start terminals support E!8Q, E!9Q, E!10Q, 
E!11Q, E!12Q, and E!13Q. To support screen saving and menu printing, the menu 
screencode command must be used.

menu screencode.