3com MSR 20-20 참조 매뉴얼

# Set the screen code for VTY 1 to E!9Q.

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc] vty 1 screencode E!9Q 

vty vty-number telnet remote ip-address [ port-number ] [ source source-ip ]

undo vty vty-number

Terminal template view

vty-number: VTY number, ranging 0 to 7.

ip-address: FEP IP address.

port-number: Listening Telnet port on the FEP. It ranges 1 to 50000 and defaults to 
23.

source source-ip: Source IP address bound.

Use the vty telnet remote command to create a VTY for Telnet terminal access.

Use the undo vty command to remove the specified VTY.

Note that, after this configuration, no more RTC client VTYs or RTC server VTYs 
can be configured in the template of the VTY.

# Create a VTY for Telnet terminal access, setting the FEP IP address to 1.1.1.1.

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc] vty 1 telnet remote 1.1.1.1 

vty vty-number tty remote ip-address port-number [ source source-ip ]

undo vty vty-number

Terminal template view

vty-number: VTY number, ranging 0 to 7.

ip-address: FEP IP address.

port-number: Listening port number of the ttyd program on the FEP, ranging 1024 
to 50000.