3com MSR 20-20 참조 매뉴얼
968
C
HAPTER
72: BGP C
ONFIGURATION
C
OMMANDS
display bgp routing-table
Syntax
display bgp routing-table [ ip-address [ { mask | mask-length } [ longer-prefixes ] ] ]
View
Any view
Parameters
ip-address: Destination IP address.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-prefixes: Matches the longest prefix.
Description
Use the display bgp routing-table command to display specified BGP routing
information in the BGP routing table.
information in the BGP routing table.
Examples
# Display BGP routing table information.
<Sysname> display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
h - history,
i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network
NextHop
MED
LocPrf
PrefVal Path/Ogn
*>
40.40.40.0/24
20.20.20.1
0
200 300i
Peer optional capabilities
Optional capabilities supported by the peer, including
BGP multiple extension and routing refresh.
BGP multiple extension and routing refresh.
Address family IPv4 Unicast
Routes are advertised and received in the form of IPv4
unicast
unicast
Received
Total numbers of received packets and updates
Sent
Total numbers of sent packets and updates
Maximum allowed prefix number
Maximum allowed prefix number
Threshold Threshold
value
Minimum time between
advertisement runs
advertisement runs
Minimum time between route advertisements
Optional capabilities
Optional capabilities enabled by the peer
Peer Preferred Value
Preferred value specified for the routes from the peer
Routing policy configured
Local routing policy
Table 218 Description on the fields of the display bgp peer command
Field Description
Table 219 Description on the fields of the display bgp routing command
Field Description
Total Number of
Routes
Routes
Total Number of Routes