3com MSR 20-20 참조 매뉴얼
969
display bgp routing-table as-path-acl
Syntax
display bgp routing-table as-path-acl as-path-acl-number
View
Any view
Parameters
as-path-acl-number: Displays routing information permitted by the AS path ACL,
which is specifies with a number from 1 to 256.
which is specifies with a number from 1 to 256.
Description
Use the display bgp routing as-path-acl command to display BGP routes
permitted by an as-path ACL.
permitted by an as-path ACL.
Examples
# Display BGP routes permitted by AS path ACL 1.
BGP Local router
ID
ID
BGP Local router ID
Status codes
Status codes:
* - valid
> - best
d - damped
h - history
i - internal (IGP)
s - summary suppressed (suppressed)
S - Stale
Origin
i - IGP (originated in the AS)
e - EGP (learned through EGP)
? - incomplete (learned by other means)
Network Destination
network
address
Next Hop
Next hop IP address
MED MULTI_EXIT_DISC
attribute
LocPrf
Local preference value
PrefVal
Preferred value of the route
Path
AS_PATH attribute, recording the ASs the packet has passed to avoid
routing loops
routing loops
PrefVal Preferred
value
Ogn
Origin attribute of the route, one of the following values:
i
Indicates that the route is interior to the AS.
Summary routes and the routes configured using the network
command are considered IGP routes.
command are considered IGP routes.
e
Indicates that the route is learned via the exterior gateway
protocol (EGP).
protocol (EGP).
?
Short for INCOMPLETE. It indicates that the origin of the route is
unknown and the route is learned by other means.
unknown and the route is learned by other means.
Table 219 Description on the fields of the display bgp routing command
Field Description