3com MSR 20-20 참조 매뉴얼
975
Refer to Table 219 for description on the other fields above.
display bgp routing-table peer
Syntax
display bgp routing-table peer ip-address { advertised-routes | received-routes }
[ network-address [ mask | mask-length ] | statistic ]
[ network-address [ mask | mask-length ] | statistic ]
View
Any view
Parameters
ip-address: IP address of a peer.
advertised-routes: Displays routing information advertised to the specified peer.
received-routes: Displays routing information received from the specified peer.
network-address: IP address of the destination network.
mask: Mask of the destination network, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
statistic: Displays route statistics.
Description
Use the display bgp routing-table peer command to display BGP routing
information advertised to or received from the specified BGP peer.
information advertised to or received from the specified BGP peer.
Related commands:
Examples
# Display BGP routing information advertised to BGP peer 20.20.20.1.
<Sysname> display bgp routing-table peer 20.20.20.1 advertised-routes
Total Number of Routes: 2
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
h - history,
i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network
NextHop
MED
LocPrf
PrefVal Path/Ogn
*>
30.30.30.0/24
0.0.0.0
0
0
i
*>
40.40.40.0/24
0.0.0.0
0
0
i
Refer to Table 219 for description on the fields above.
Table 222 Description on the fields of the display bgp routing flap-info command
Field Description
From
Source IP address of the route
Flaps
Number of routing flaps
Duration
Duration time of the flap route
Reuse
Reuse time of the flap route