3com MSR 20-20 참조 매뉴얼

undo ebgp-interface-sensitive

BGP view/BGP-VPN instance view

None

Use the ebgp-interface-sensitive command to enable the clearing of EBGP 
session on any interface that becomes down.

Use the undo ebgp-interface-sensitive command to disable the function.

This function is enabled by default.

# In BGP view, enable the clearing of EBGP session on any interface that becomes 
down.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ebgp-interface-sensitive 

# In BGP-VPN instance view, enable the clearing of EBGP session on any interface 
that becomes down (the VPN has been created).

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv4-family vpn-instance vpn1

[Sysname-bgp-vpn1] ebgp-interface-sensitive 

filter-policy { acl-number | ip-prefix ip-prefix-name } export [ direct | isis process-id | 
ospf process-id | rip process-id | static ]

undo filter-policy export [ direct | isis process-id | ospf process-id | rip process-id | 
static ]

BGP view/BGP-VPN instance view

acl-number: Number of an ACL used to filter outgoing redistributed routing 
information, ranging from 2000 to 3999.

ip-prefix-name: Name of an IP prefix list used to filter outgoing redistributed 
routing information, a string of 1 to 19 characters.

direct: Filters direct routes.

isis process-id: Filters outgoing routes redistributed from an ISIS process. The ID is 
in the range 1 to 65535.

ospf process-id: Filters outgoing routes redistributed from the OSPF process with 
an ID from 1 to 65535.