Xerox 2135 사용자 가이드
Advanced Features and Troubleshooting Manual
43
Managing Printer Usage
Ethernet Menu
Sets options for the Ethernet port connection.
Ethernet Menu Items
Menu Items
Description
Print Connect
Setup Page
Prints a page that provides instructions for connecting the printer to a
computer or network.
Print Configuration
Page
Prints the Configuration Page which shows the printer's current information
and menu settings.
It lists the printer name, software revision level,
communication parameter settings, options installed, current option settings
in the front panel’s menu system, and print counts.
IP Address
Resolution
Sets the method used to assign the IP address, including Subnet mask and
default gateway.
Values:
Values:
Static
BOOTP
DHCP
BOOTP
DHCP
(default)
IP Address
Sets the four byte IP address. (This menu item only appears if IP Address
Resolution
Resolution
is set to static.)
Values:
xxx.xxx.xxx.xxx
where xxx = 000 to 255
where xxx = 000 to 255
Note
Once the front panel shows IP Address on the top line, use the
Value Up
or
Value Down
key (labeled 3 and 7) to scroll to the
desired value at the cursor location. To move the cursor, use the
Item Up
or
Item Down
key (labeled 2 and 6). Thus, you can change
characters within the address rather than having to re-enter the
entire address. The printer must be turned off and on before the
changes will take effect.
entire address. The printer must be turned off and on before the
changes will take effect.
Subnet Mask
Sets the four byte Subnet Mask address. (This menu item only appears if IP
Address Resolution
Address Resolution
is set to static.)
Values:
xxx.xxx.xxx.xxx
where xxx = 000 to 255
where xxx = 000 to 255
Note
Once the front panel shows
Subnet Mask
on the top line,
use the
Value Up
or
Value Down
key (labeled 3 and 7) to scroll
to the desired value at the cursor location. To move the
cursor, use the
cursor, use the
Item Up
or
Item Down
key (labeled 2 and 6).
Thus, you can change characters within the address rather
than having to re-enter the entire address. The printer must
be turned off and on before the changes will take effect.
be turned off and on before the changes will take effect.
For more information, refer to the Setting Network
Addresses section on page 38.
Addresses section on page 38.