Xerox 2135 用户指南

下载
页码 153
Advanced Features and Troubleshooting Manual
43
Managing Printer Usage
Ethernet Menu
Sets options for the Ethernet port connection.
Ethernet Menu Items
Menu Items
Description
Print Connect 
Setup Page
Prints a page that provides instructions for connecting the printer to a 
computer or network.
Print Configuration 
Page
Prints the Configuration Page which shows the printer's current information 
and menu settings.
 
It lists the printer name, software revision level, 
communication parameter settings, options installed, current option settings 
in the front panel’s menu system, and print counts.
IP Address 
Resolution
Sets the method used to assign the IP address, including Subnet mask and 
default gateway.
Values:
Static
BOOTP
DHCP
 (default)
IP Address
Sets the four byte IP address. (This menu item only appears if IP Address 
Resolution
 is set to static.) 
Values:
xxx.xxx.xxx.xxx
where xxx = 000 to 255 
Note
Once the front panel shows IP Address on the top line, use the 
Value Up
 or 
Value Down
 key (labeled 3 and 7) to scroll to the 
desired value at the cursor location. To move the cursor, use the
 
Item Up
 or 
Item Down
 key (labeled 2 and 6). Thus, you can change 
characters within the address rather than having to re-enter the 
entire address. The printer must be turned off and on before the 
changes will take effect.
For more information, refer to the Setting Network Addresses 
section on page 38.
Subnet Mask
Sets the four byte Subnet Mask address. (This menu item only appears if IP 
Address Resolution
 is set to static.)
Values:
xxx.xxx.xxx.xxx
where xxx = 000 to 255 
Note
Once the front panel shows
 Subnet Mask
 on the top line, 
use the 
Value Up
 or 
Value Down
 key (labeled 3 and 7) to scroll 
to the desired value at the cursor location. To move the 
cursor, use the
 Item Up
 or 
Item Down
 key (labeled 2 and 6). 
Thus, you can change characters within the address rather 
than having to re-enter the entire address. The printer must 
be turned off and on before the changes will take effect.
For more information, refer to thSetting Network 
Addresses
 section on page 38.