Xerox 7760 부록 매뉴얼
Printer Settings
Phaser® 7760 Color Laser Printer
4-17
Setting the Default Punch Option
If the printer has a finisher, the Punch Option setting specifies the default for punching output.
Print jobs use the default punch option unless a different option is selected in the printer driver
when a job is sent to the printer.
Print jobs use the default punch option unless a different option is selected in the printer driver
when a job is sent to the printer.
To select the default punch option, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
The factory default option for punching holes is Off. To select the default punch option on the
control panel:
control panel:
1.
Select
Printer Setup
, and then press the OK button.
2.
Select
Paper Handling Setup
, and then press the OK button.
3.
Scroll to
Punch
, select either
On
or
Off
, and then press the OK button.
4.
If your finisher has a 2- / 4-hole punch installed, select
2 Holes
or
4 Holes
, and then press
the OK button.
5.
If your finisher has a 3-hole punch installed, select
3 Holes
, and then press the OK button.
Using CentreWare IS
To select the default hole-punching option using CentreWare IS:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select General on the left sidebar, and then select Printer Defaults.
5.
Select On from the Punch drop-down list to turn on hole punching. The default setting is
Off.
Off.
6.
Select the appropriate hole-punching option from the Punch Holes drop-down list. The
default setting is 3.
default setting is 3.
7.
Click the Save Changes button at the bottom of the page.