Xerox 6180MFP 사용자 가이드

Condensation has 
occurred inside the 
printer

Turn the printer on, and leave it on, for at least one hour to get rid of the 
condensation. If the problem continues, refer to the Xerox Support website, 

.

Paper cannot be fed.

 

Paper jams. 

 

Multiple paper are fed. 
Paper is fed at an 
angle. 

 

Paper is wrinkled.

Is the paper correctly loaded?

Load the paper correctly. For labels, transparencies, or envelopes, fan 
them well to allow air to enter between each sheet before loading. See 

Is the paper damp?

Replace with paper from a new ream. See 

on page 5-13.

The paper used is not suitable. 

Load the correct type of paper. See 

Is the paper tray set correctly? 

Push the paper tray completely into the printer.

Is the printer placed on a flat location? 

Place the printer on a stable flat surface.

Are the paper tray guides set in the correct positions? 

Set the guides to the correct positions. See 

on page 5-13.

Paper is fed more than 1 sheet at a time.

Multiple feeding of paper may occur before the sheets of paper loaded in 
the tray are used up. Remove the paper, fan it, and load again. Replenish 
paper only when all the sheets of the loaded paper are used up.

Unusual noises

The printer is not level.

Reposition the printer on a flat, stable surface.

The paper tray is not inserted properly.

Push the paper tray completely into the printer.

There is a foreign object inside the printer.

Turn off the printer and remove the foreign object. Refer to the Xerox 
Support website, 

, for assistance.