Preh mci 128 사용자 설명서

 

MCI_Manual_V13.doc 

Page:  4 of 20 

03555-120 

1 

Operating Instructions and Technical Data 

2 

Preh Commander

®

 MCI family keyboard 

 
 
 
 
 
 
 
 

The Preh Commander

®

 MCI family keyboard has been developed for use with IBM-AT-compatible 

PS/2 and USB systems. The keyboard can be used with all popular operating systems. 

In order to provide problem-free operation of the keyboard using USB, it 
must be insured that the USB interface is supported by the operating 
system. This is the case for Windows 98SE and later, as well as Linux 
with a kernel version of 2.4.18 or higher. 

In addition, insure that USB legacy support is activated in the BIOS of 
your system. 

Please see the description of your motherboard for instructions regarding the BIOS settings.

 

The operating systems Windows 95, Windows NT and Windows 98 do not support 
the USB interface, or do so only partially. Problem-free operation is not insured in 
these cases. 

Procedure 

• 

If a keyboard is already connected to the computer, please remove it. 

• 

Now insert the USB plug of the keyboard cable into an unoccupied USB socket. 

• 

Now restart your system or switch it on. Certain drivers may be automatically installed by the 
operating system. The keyboard is then ready for use.  

Installation must be carried out when the computer is switched off. If 
a keyboard is already connected to the computer, please remove it. 

Now insert the violet 6-pin mini DIN plug (

) of the keyboard 

cable into the keyboard socket provided on the computer. Insure that the 
poles are correct (coding pin). 

Never force the keyboard plug into the PS/2 socket on the computer. This could 
result in bending of the connection pins – danger of short circuits! 

Fig 3 PS/2 

plug 

Fig. 1  Contents of package 

Fig. 2 USB 

plug