Preh mci 128 사용자 설명서

 

MCI_Manual_V13.doc 

Page:  6 of 20 

03555-120 

 

The parameters of the MSR can be set and/or modified 
using the corresponding Preh programming software.

 

You can find further information, as well as the 
associated software, in the Internet under 

http://www.preh-keytec.com

. 

Important notice:  Please hold the magnetic card near the upper edge during a swipe. 

 

The optional keylock (

) module has 5 positions and is supplied with 3 different keys. 

All keys can be inserted and removed in both positions 0 and 1. 

The following switch positions can be set with the three keys: 

•  SUP key: 0 1 2 3 4 
•  REG key: 0 1 
•  X key: 0 1 2 

By default, the code for the new switch position is transferred to 
the computer when the key is turned. 

The parameters of the keylock can be set and/or modified using 
the corresponding Preh programming software. 

You can find further information, as well as the associated software, in the Internet under 

http://www.preh-keytec.com

. 

 

The EMC 3.1.1- and ISO 7816-certified SCR module of the MCI family 
allows you to read and write chip cards of types T=0, T=1, I²C, 2-wire, 
3-wire and PTS. 

PC/SC drivers for the popular Windows operating systems (as of 
Windows 98) are available as the software interface. A CT-API 
interface can be placed on the PC/SC interface. 

In order to read or write a chip card, carefully insert the chip card into 
the read slot; make sure that the chip contact surfaces face in the 
direction of the keypad (

). A slight click indicates that the end 

position has been attained. Reading or writing can now be carried out. 

You can find further information, as well as the associated driver 
software, in the Internet under 

http://www.preh-keytec.com

. 

Fig. 7  Magnetic stripe reader 

Swipe direction 

Turning direction 

Fig. 8 Keylock 

Fig. 9 SCR 

module 

Contact- 
surfaces