Avaya P550 사용자 설명서

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)

Cajun P550/P220 Switch Operation Guide

3-3

not be provided or otherwise made available to any other person.

No title to and ownership of the software is hereby transferred.

Contains software developed by:

Epilogue Technology Corporation

TEC Technically Elite Concepts, Inc.,

Hermosa Beach, California, U.S.A.

ISI Integrated Systems, Inc.

All other trademarks used herein are the property of their respective

owners.

Lucent Technologies Cajun Switch Agent v4.0.0

Press Ctrl-P for previous command, Ctrl-N for next command,? for help.

Note: Information you enter at the Login and Password prompts is case sensitive.

4. At the Login prompt, enter root. The password prompt displays.

Password:

5. At the Password prompt, enter root as the default password. The command line

interface prompt displays.

6. Enter the command

enable.

7. Enter the command

configure.

This changes the command mode to configure

mode so that you can use the

setup

command.

8. Enter the command

setup.

This initiates a series of queries. Answer each query as

follows:

a. When prompted to change the super user password, press Enter to accept the

default answer of Yes.

b. Enter your old password. The system then prompts you for a new password.

The default password is root.

c. Enter your new password, then re-enter the new password to verify your

choice.

d. Enter the IP address for the switch manager’s Ethernet console.

e. Enter the subnet mask for the network’s IP address.

Enter the default gateway for the switch.

Figure 3-1 illustrates an example setup command session.