Avaya 6402D 사용자 가이드
CHAPTER 4. OPERATING FEATURES
3.
Press
[SPLIT]
.
SPLIT light goes off.
4.
Report to the caller.
5.
Press
[RELEASE]
.
Display, ATND, and ANS lights go off. PA light goes on. Caller and called party are
connected.
connected.
To place an outgoing trunk call at the request of a voice terminal user:
If you use direct trunk group selection to select trunks, press direct trunk group select
button. Listen for dial tone. Go to Step 3.
button. Listen for dial tone. Go to Step 3.
1.
2.
3.
4.
5.
6.
7.
Press
[START] .
Listen for
light goes
light goes
Note:
dial tone. Voice terminal user is separated from the connection. SPLIT
on. See Note.
on. See Note.
If you activate Malicious Call Trace while a caller is split from the
console, the split condition is disabled. SPLIT light goes off. The
internal caller hears dial tone. The outside caller is disconnected.
Dial Trunk Group dial code.
Listen for dial tone. ANS light goes on.
Dial the outside number.
Listen for ringback tone. Called party answers.
Announce the call.
Press
[SPLIT]
.
SPLIT light goes off (3-way connection).
Tell the caller that the called party is on the line.
Press
[RELEASE]
.
Display, ATND, and ANS lights go off. PA light goes on. Caller and called party are
connected.
connected.
4-24