Epson 450W 사용자 가이드

The Direct Power On function enables faster setup. The projector 
starts up automatically when you plug it in or turn it on with a wall 
switch. You don’t have to press the Ppower button. 

Follow these steps to enable Direct Power On: 

1. Press the 

Menu

 button on the remote control or projector, then 

select the 

Extended

 menu and press 

Enter

.

2. Choose 

Operation

 and press 

Enter

. 

3. Choose 

Direct Power On

 and press 

Enter

.

4. Highlight 

On

 and press 

Enter

. 

5. Press 

Menu

 to exit. The setting will take effect the next time you 

plug the projector into a power outlet or turn it on with a wall 
switch.

This projector incorporates Instant Off technology. To turn it off, you 
can press its Ppower button as described below, unplug it, or turn off 
a power switch that supplies power to the projector. You don’t have to 
wait for the projector to cool down first.

1. To turn off the projector, press the Ppower

 

button on the remote 

control or projector.

You see a confirmation message. 
(If you don’t want to turn it off, 
press any other button.)

2. Press the Ppower button again. The projection lamp turns off 

and the projector beeps twice. You can then unplug the power 
cord. 

You can set the projector to 
automatically turn off the 
lamp and enter “sleep mode” 
when it has not received any 
signals for 1 to 30 minutes 
(see page 68). This conserves 
electricity, cools the 
projector, and extends the 
life of the lamp. If you want 
to start projecting again, 
press the P power button.