Epson 450W 사용자 가이드

If you want to turn the projector on again, make sure the orange 
P

power light is not flashing, then press the Ppower button.

You may need to select the image source if you have multiple image 
sources connected to the projector (such as a computer or DVD 
player). Selecting the image source lets you switch between images 
input from different pieces of connected equipment. 

If you don’t see the image you want, press the 

Source Search

 button 

on the remote control or the projector until you see the image you 
want to project. Or, press one of the Source buttons on the remote 
control (

Computer

, 

Video

, 

USB

,

 

or 

LAN

).

If you still can’t see an image or can’t project the same image that is on 
your notebook or computer screen, see page 114 for solutions.

Select 

USB 

to project from a USB device or 

LAN

 to project over a 

network. See page 40 for instructions.

Once you see your image, you may need to make certain adjustments:

■

To focus the image, see page 29.

■

To quickly adjust the color, brightness, or contrast, see page 30.

■

To change the image aspect ratio, see page 31.

■

If you need to fine-tune the image and/or sound, see 
“Fine-Tuning the Projector” on page 59.

Source Search button

Source 
buttons