Epson dfx-8000 제품 데이터시트

Optional paper cutter:

Cutting position accuracy: 

 mm 

Available cutting area:
Within 25.4 mm (1’) below the perforation

at the top of the page

Electrical

 

103.5 to 132.0 VAC (12OV model)
198.0 

to 264.0 VAC (220-240V model)

7A (12OV model)
5A (220-240V model)

200 watts (during self 

test 

printing in draft

mode)

to 

10 M 

ohms minimum (between AC 

power

line 

and chassis)

12OV model can withstand 

1.00 KV rms

applied for one minute or 1.20 

applied for one second
220-240V model can withstand 

1.25 

KV rms

applied for one minute or 1.50 KV rms
applied for one second

Operation:

 to 

to 

Storage:

 to 

 to 

Operation:

10% to 80% 
without condensation

Storage:

5% to 85% 
without condensation

Most software 

 let you specify the type of printer you are

using so that the program can take 

 advantage of the printer’s

features.   your application program 

 an 

 or setup

procedure that lets you 

 your printer from 

a   of printers,

choose the Epson DFX-8000 printer. If the list does not include the
DFX-8000, choose one of the following printers, listed in order of
preference:

DFX-5000
FX-1050 (FX-850)
FX-286e (FX-86e)
EX-1000 (EX-800)
FX-185 (FX-85)
FX-100+ (FX-80+)
FX-100 (FX-80)

If these printers are not listed, select one of the following printers.
listed in order of preference:

FX
EX
LX

RX
MX                                  
Epson printer
9-pin printer

Standard printer
Draft printer

If you plan to use IBM emulation mode, select one of the following
printers, listed in order of preference:

IBM Proprinter XL
IBM Graphics printer
IBM Printer

Lights

POWER 
On when the power switch is on and power is supplied to the

printer.

READY (green)
On when the printer is on line and ready to receive data from your
computer. This light flickers during printing.

PAPER OUT (red)

On when the printer is out of paper. This light 

there is no paper positioned behind the print head.

paper loaded on the tractors in the standby position. (The printer

also beeps when it is out of paper.)

ON LINE 

On when the printer is on line and ready to receive and print data
from the computer. Also, when the print head overheats, 

the 

LINE light blinks. The printer stops printing, waits several minutes
while the print head cools, and then resumes printing.

TEAR 

Off (green)

On when the printer is in tear-off mode.

TOP OF FORM (green)
On when the printer is in top of form mode. When this light blinks,
you can adjust the loading and top of form positions.

PAPER SELECT (red/green)
The front tractor arrow goes on when the front tractor is selected.

The rear tractor arrow goes on when the rear tractor is selected.
The light is green when paper is loaded, even if 

the 

paper 

is in the

standby position, and red when the tractor is completely out of
paper.