Epson 830p 매뉴얼

■

To change the network addresses from the projector’s control 
panel, press the right and left arrow buttons to select the part 
of the address you want to enter, then use the up and down 
arrow buttons to increase or decrease the numeric value. 

When you finish changing an address in the network menu, press 
the 

Enter

 button (on the remote control) or the 

Auto/Enter

 

button (on the projector). 

5. When you’re done, press 

Esc

 to exit the menu system. 

EMP Monitor lets you use a remote computer to manage your 
projectors over a wired network. It lets you easily turn the projectors 
on or off (together or individually), switch image sources, and check 
their status. 

Before using EMP Monitor, make sure you’ve installed the software 
(available for Windows only) as described on page 114. The 
computer you’re using to monitor the projector should already 
be connected to your network.

Increase 
or 
decrease
the value

Select the part of the 
address to change

Standby Mode

Network ON